Maintaining the CO2 laser cutting and engraving machine
Let`s continue the issue last time
7, lightning attack as long as the building lightning protection measures can be reliable. The first "good grounding" of this section can also help protect against lightning. Special advice: in the area of power instability (such as voltage fluctuation more than 5%), please install a power supply with capacity of at least 3000 W to prevent sudden voltage fluctuation to burn out circuit or computer.
8.Maintain and control the stability of PC. Control PC is mainly used for carving equipment control. Unless necessary graphic design software is installed, please do not use the special plane. Due to the computer installed network card and anti-virus firewall, will seriously affect the speed of the control machine. Please don't Install anti-virus firewall on the control machine, such as network card for data communication, often use offline operation partners please check the virus situation of U disk randomly, please disable the network card before starting laser engraving machine.
9. Rail maintenance: in the course of rail movement, a large amount of dust will be produced due to the processed materials. Maintenance method: first use cotton cloth to wipe the original lubricating oil and dust on the guideway and then apply a layer of lubricating oil on the surface and side of the guideway. Maintenance period: about a week.
10. Fan maintenance: after the fan has been working for a period of time, a large amount of dust will accumulate in the fan and exhaust pipe. Affect the efficiency of fan exhaust, resulting in a large amount of smoke and dust can not be discharged. Maintenance: release the connection of the exhaust pipe and fan, unload the exhaust pipe, and remove the dust from the exhaust pipe and fan. Maintenance period: about one month.
11. Fastening of screws: after the motion system works for a certain time, the screws at the joint will be loosened, and when the screws are loosened, the stability of the mechanical movement will be affected. Laser engraving and cutting machine maintenance method: fastening screws one by one with random attached tools. Maintenance period: about one month.
12. Lens maintenance: after the machine has been working for some time, the lens will be on the surface due to the working environment. By sticking a layer of ash, the reflectivity of the mirror and the transmittance of the lens will be reduced, and the working power of the laser will eventually be affected. Maintenance method: wipe the lens surface gently clockwise with degreased cotton with ethanol, wipe off the dust
That`s all.About the maintaince of laser cutting machine,i have introduced 12 methods.The more you learn,the longer of your machine life.More methods about how to choose laser machine,how to operate laser machine,the tendency of laser marking machine,laser cutting machine etc,pls contact me.
